昨天做了nand-flash到sdram的4k數據的拷貝，數據從steppingstone拷貝到sdram上面執行；今天接著，將對nand-flash上4k以后的數據進行拷貝，所以重點是nand-flash和sdram的控制。

先說說tq2440開發板。

當開發板boot跳線接上時，處理器上電后從nand-flash啟動從0x0開始執行，nand-flash開始的4k數據會自動的復制到內部sram執行

下面是s3c2440關于memory啟動時的特性說明：

　　In recent times, NOR flash memory gets high in price while an SDRAMand a NAND flash memory is comparativelyeconomical ,motivating some users to execute theboot codeon a NAND flash and execute the main code on an SDRAM.

　　S3C2440A boot code canbe executed on an external NAND flash memory. In order to supportNAND flash boot loader, the S3C2440A is equipped with aninternal SRAM buffer called ‘Steppingstone’. When booting, thefirst 4 KBytes of the NAND flash memory will be loaded intoSteppingstone and the boot code loaded into Steppingstone will beexecuted.

　　Generally,the boot code will copy NAND flash content to SDRAM.Usinghardware ECC, the NAND flash data validity will be checked.Uponthe completion of the copy, the main program will be executed on theSDRAM.

認真讀完這幾段，啟動時存儲器的使用過程將有個大概的認識。

在上次的實驗中，我們就是控制SDRAM將數據從SRAM（steppingstone）拷貝到天嵌開發板上的sdram（使用bank6，地址0x3000000）上。

上圖是我依照自己的理解繪出的啟動時拷貝過程，敬請指正。