TOPSwitch-JX 系列TOP266EG是高性價比器件，它集成了725V　功率MOSFET，高壓開關電流源，多模式PWM控制，振蕩器，熱關斷電路，故障保護以及其它控制電路．265 VAC時無負載的功耗低于100 mW，工作頻率132 kHz，降低了變壓器尺寸和電源的體積．本文介紹了TOPSwitch-JX 系列主要特性，產品亮點，功能方框圖，以及65W 19V和30W 12V通用輸入反激電源電路圖，27W LCD監視器電源參考設計主要指標，電路圖以及所用材料清單(BOM)．

Power Supply Using TOP266EG

90 VAC–265 VAC Input; 5V, 2.5A and　14.5V, 1A Outputs

Application LCD Monitor

TOPSwitch-JX cost effectively incorporates a 725 V power MOSFET, high voltage switched current source, multi-mode PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device.

TOP266EG產品亮點：

• EcoSmart® - Energy Efficient

• Energy efficient over entire load range

• No-load consumption below 100 mW at 265 VAC

• Up to 750 mW standby output power for 1 W input at 230 VAC High Design Flexibility for Low System Cost

• Multi-mode PWM control maximizes efficiency at all loads

• 132 kHz operation reduces transformer and power supply size

• 66 kHz option for highest efficiency requirements

• Accurate programmable current limit

• Optimized line feed-forward for line ripple rejection

• Frequency jittering reduces EMI filter cost

• Fully integrated soft-start for minimum startup stress

• 725 V rated MOSFET

• Simplifies meeting design derating requirements Extensive Protection Features

• Auto-restart limits power delivery to <3% during overload faults

• Output short-circuit protection (SCP)

• Output over-current protection (OCP)

• Output overload protection (OPP)

• Output overvoltage protection (OVP)

• User programmable for hysteretic/latching shutdown

• Simple fast AC reset

• Primary or secondary sensed

• Line undervoltage (UV) detection prevents turn-off glitches

• Line overvoltage (OV) shutdown extends line surge withstand

• Accurate thermal shutdown with large hysteresis (OTP) Advanced Package Options

• eDIP™-12 package:

• Low profile horizontal orientation for ultra-slim designs

• Heat transfer to both PCB and heat sink

• Optional external heat sink provides thermal impedance equivalent to a TO-220

• eSIP®-7C package:

• Vertical orientation for minimum PCB footprint

• Simple heat sink mounting using clip provides thermal impedance equivalent to a TO-220

• Extended creepage to DRAIN pin

• Heat sink is connected to SOURCE for low EMI

圖１．TOP266EG 功能方框圖(E和V封裝)

圖２．采用TOP266EG的65W 19V通用輸入反激電源電路圖

圖３．采用TOP266EG的30W 12V通用輸入反激電源電路圖

27W LCD監視器電源設計方案

This document is an engineering report describing a 5 V / 2.5 A, 14.5 V / 1 A power supply utilizing a TOP266EG. The TOP266EG is part of the TOPSwitch-JX IC family from Power Integrations. The document contains the power supply specification, schematic, bill of materials, transformer documentation, printed circuit layout, and performance data.


圖４．27W LCD監視器電源參考設計外形圖[!--empirenews.page--]

27W LCD監視器電源參考設計指標：


圖５．27W LCD監視器電源參考設計電路圖

圖６．參考設計中的變壓器電方框圖

27W LCD監視器電源參考設計材料清單（ＢＯＭ）：




圖７．27W LCD監視器電源參考設計ＰＣＢ布局圖