必須有CD1，CD2（即2張光盤）才可以安裝PSD

1，SETUP--》選出LICENSE。DAT--》選出你所需要安裝的模塊（只有WINNT，WIN2000，UNIX系統下才可以安裝Allegro）--》在環境設置修改環境變量SET_LICENSE_FILE，其值為L(zhǎng)ICENSE的位置，如c:flexlmlicense.dat（如果你是采用網上流傳的LICENSE，則必須修改，因?yàn)榘惭b時，該軟件把LICENSE 的位置定位為00000000@flexserver了，具體原因請參照FLEXLM手冊）

2，重新啟動計算機即可。

Cadence PSD 14 Instalation Instructions

1-For Win9x/Me it will only insatall OrCAD 9.2.1
Allegro 14 requires WinNT/2K
2-Run Setup.exe from CD1
3-Select Network Install
4-Skip License Manager Install
5-Select Install Products
6-Point to the supplied License.dat
Be sure you have clicked on the path and it is copied
to the edit box !!
7-Select the products you need.
Remember that ALL options are enabled, so its not
necessary to install Layout if you install Layout Plus
8-Feed the CDs as required
9-Reboot if it asks to
A-Thats it, enjoy


來源:0次