日本黄色一级经典视频|伊人久久精品视频|亚洲黄色色周成人视频九九九|av免费网址黄色小短片|黄色Av无码亚洲成年人|亚洲1区2区3区无码|真人黄片免费观看|无码一级小说欧美日免费三级|日韩中文字幕91在线看|精品久久久无码中文字幕边打电话

當前位置:首頁 > 汽車電子 > 汽車電子技術文庫
[導讀] Rohm公司的BD57121MUF-M是汽車NFC兼容無線功率發送器評估板,包括了ROHM公司的汽車級(AEC-Q100規范)無線功率發送控制IC(BD57121MUF-M)和ST公司的NFC閱

Rohm公司的BD57121MUF-M是汽車NFC兼容無線功率發送器評估板,包括了ROHM公司的汽車級(AEC-Q100規范)無線功率發送控制IC(BD57121MUF-M)和ST公司的NFC閱讀器IC(ST25R3914)以及8位MCU(STM8A系列),兼容WPC的Qi標準,充電高達15W,多線圈設計加寬了充電范圍(比單線圈大2.7倍),輸入電壓11.0-13.0V,輸出電壓12.0V(接收邊),輸出電流1.25A(接收邊).本文介紹了評估板BD57121MUF-M主要特性和性能指標,無線功率傳輸和NFC的系統配置圖以及評估板BD57121MUF-M主要元件,框圖,連接圖,電路圖,材料清單和PCB設計圖.

ROHM has recently announced the development of an automotive wireless charging soluTIon with integrated NFC communicaTIon. This soluTIon combines ROHM’s automoTIve-grade (AEC-Q100 qualified) wireless power transmission control IC (BD57121MUF-M) with STMicroelectronics’NFC Reader IC (ST25R3914) and 8-bit microcontroller (STM8A series). In addition to being compliant to WPC’s Qi standard supporting EPP (Extend Power Profile) that enables the charger to supply up to 15W of power, the multi-coil design enables a wide charging area that provides some spatial freedom in vehicle applications (2.7x greater charging range vs single coil configurations). This means that consumers do not need to worry much about exactly aligning their smartphones to the provided charging area in order to be able to charge wirelessly.

Wireless charging technology, commonly used in portable devices such as smartphones to improve the safety and resistance to water and dust of connectors, is seeing increased adoption in infrastructure applications including vehicles, hotels, airports, cafes, and similar public locations. At present, Qi, the most popular standard, has already been adopted by the European Automotive Standards Group (CE4A) as the charging standard in vehicles, and by 2025 it is predicted that most cars will be equipped with Qi-based wireless chargers.

Meanwhile, NFC communication provides user authentication to allow Bluetooth/WiFi communication with infotainment system, lock/unlock the doors, and allow engine start. NFC also enables vehicle setting customization for multiple drivers such as seat and mirror positioning, infotainment pre-sets, and navigation destination pre-sets.

BD57121MUF-EVK-001 Evaluation Board is based on the BD57121MUF-M Automotive-grade wireless power transmitter IC. This boardintegrates the ST25R3914 NFC reader/writer IC from ST Microelectronics to detect the presence of any NFC cards or tags and to preventdamaging of the NFC antennae by the wireless power transfer system. Wireless power transfer is compliant with WPC Qi ver1.2.4 and can supplypower up to 15 W (output in receiver). Detection and identification of NFC Type A, B, F and V are possible.

評估板BD57121MUF-M主要特性:

?Compliance to WPC Qi ver1.2.4
?Support of Multiple coils to increase charging area(Qi MP-A13 coil type)
?Power control using fixed frequency and variable voltage
?NFC card/tag detection of Type A, B, F, V
?Housing size: 120 mm x 65 mm x 30 mm


圖1.評估板BD57121MUF-M外形圖

評估板BD57121MUF-M性能指標:

These are only representative values, and they do not represent guaranteed values of the product characteristics.
VIN = 12 V, unless otherwise specified.


System configuration for wireless power transfer and NFC

Wireless power transfer system consists of a two-way power transmission and communication system using a transmitter and areceiver, and the NFC system also communicates between the reader (= transmitter) and the listener. A single Microcontroller (MCU)controls both wireless power transmission and NFC reader, so it is possible to have seamless operation between each other.


圖2.用于無線功率傳輸和NFC的系統配置圖
評估板BD57121MUF-M主要元件:


圖3.評估板BD57121MUF-M-001框圖


圖4.評估板BD57121MUF-M-001連接圖


圖5.評估板BD57121MUF-M-001電路圖(1)


圖6.評估板BD57121MUF-M-001電路圖(2)
評估板BD57121MUF-M-001材料清單:


圖7.評估板BD57121MUF-M-001 PCB設計圖(1):頂層絲印和布局


圖8.評估板BD57121MUF-M-001 PCB設計圖(2):底層絲印和布局


圖9.評估板BD57121MUF-M-001 PCB設計圖(3):頂層布局


圖10.評估板BD57121MUF-M-001 PCB設計圖(4):中間1層布局


圖11.評估板BD57121MUF-M-001 PCB設計圖(5):中間2層布局


圖12.評估板BD57121MUF-M-001 PCB設計圖(6):底層布局
詳情請見:
https://d1d2qsbl8m0m72.cloudfront.net/en/products/databook/datasheet/ic/power/switching_regulator_system/bd57121muf-evk-001_ug-e.pdf
bd57121muf-evk-001_ug-e.pdf

本站聲明: 本文章由作者或相關機構授權發布,目的在于傳遞更多信息,并不代表本站贊同其觀點,本站亦不保證或承諾內容真實性等。需要轉載請聯系該專欄作者,如若文章內容侵犯您的權益,請及時聯系本站刪除。
換一批
延伸閱讀

LED驅動電源的輸入包括高壓工頻交流(即市電)、低壓直流、高壓直流、低壓高頻交流(如電子變壓器的輸出)等。

關鍵字: 驅動電源

在工業自動化蓬勃發展的當下,工業電機作為核心動力設備,其驅動電源的性能直接關系到整個系統的穩定性和可靠性。其中,反電動勢抑制與過流保護是驅動電源設計中至關重要的兩個環節,集成化方案的設計成為提升電機驅動性能的關鍵。

關鍵字: 工業電機 驅動電源

LED 驅動電源作為 LED 照明系統的 “心臟”,其穩定性直接決定了整個照明設備的使用壽命。然而,在實際應用中,LED 驅動電源易損壞的問題卻十分常見,不僅增加了維護成本,還影響了用戶體驗。要解決這一問題,需從設計、生...

關鍵字: 驅動電源 照明系統 散熱

根據LED驅動電源的公式,電感內電流波動大小和電感值成反比,輸出紋波和輸出電容值成反比。所以加大電感值和輸出電容值可以減小紋波。

關鍵字: LED 設計 驅動電源

電動汽車(EV)作為新能源汽車的重要代表,正逐漸成為全球汽車產業的重要發展方向。電動汽車的核心技術之一是電機驅動控制系統,而絕緣柵雙極型晶體管(IGBT)作為電機驅動系統中的關鍵元件,其性能直接影響到電動汽車的動力性能和...

關鍵字: 電動汽車 新能源 驅動電源

在現代城市建設中,街道及停車場照明作為基礎設施的重要組成部分,其質量和效率直接關系到城市的公共安全、居民生活質量和能源利用效率。隨著科技的進步,高亮度白光發光二極管(LED)因其獨特的優勢逐漸取代傳統光源,成為大功率區域...

關鍵字: 發光二極管 驅動電源 LED

LED通用照明設計工程師會遇到許多挑戰,如功率密度、功率因數校正(PFC)、空間受限和可靠性等。

關鍵字: LED 驅動電源 功率因數校正

在LED照明技術日益普及的今天,LED驅動電源的電磁干擾(EMI)問題成為了一個不可忽視的挑戰。電磁干擾不僅會影響LED燈具的正常工作,還可能對周圍電子設備造成不利影響,甚至引發系統故障。因此,采取有效的硬件措施來解決L...

關鍵字: LED照明技術 電磁干擾 驅動電源

開關電源具有效率高的特性,而且開關電源的變壓器體積比串聯穩壓型電源的要小得多,電源電路比較整潔,整機重量也有所下降,所以,現在的LED驅動電源

關鍵字: LED 驅動電源 開關電源

LED驅動電源是把電源供應轉換為特定的電壓電流以驅動LED發光的電壓轉換器,通常情況下:LED驅動電源的輸入包括高壓工頻交流(即市電)、低壓直流、高壓直流、低壓高頻交流(如電子變壓器的輸出)等。

關鍵字: LED 隧道燈 驅動電源
關閉