日本黄色一级经典视频|伊人久久精品视频|亚洲黄色色周成人视频九九九|av免费网址黄色小短片|黄色Av无码亚洲成年人|亚洲1区2区3区无码|真人黄片免费观看|无码一级小说欧美日免费三级|日韩中文字幕91在线看|精品久久久无码中文字幕边打电话

當前位置:首頁 > 汽車電子 > 汽車電子技術文庫
[導讀] Silabs公司的Blue Gecko BGM111是智能藍牙4.2模塊,集成了40MHz 32位ARM® Cortex®-M4核,閃存256kB,RAM32kB,融合了應用程序

Silabs公司的Blue Gecko BGM111是智能藍牙4.2模塊,集成了40MHz 32位ARM® Cortex®-M4核,閃存256kB,RAM32kB,融合了應用程序所需要的元素如藍牙無線電,軟件協議棧和基于GATT協議的配置文件.具有優異成績的RF性能:發送功率TX為+8dBm,接收靈敏度RX為-92dBm,范圍高達200米.主要用在健康和健身設備,銷售點系統,消費類電子設備,汽車零配件市場,工業和家庭自動化設備等.本文介紹了BGM111主要特性和產品亮點,框圖,應用連接圖,以及入門板SLWSTK6101B主要特性,框圖,硬件分布圖和電路圖.

The Blue Gecko BGM111 is a Bluetooth® Module targeted for Bluetooth low energy applicaTIonswhere reliable RF, low-power consumpTIon, and easy applicaTIon developmentare key requirements. At +8 dBm TX power, BGM111 is ideal for applicaTIons requiringshort and medium range Bluetooth connectivity.

The BGM111 integrates all of the necessary elements required for a Bluetooth application:Bluetooth low energy radio, a software stack, and GATT-based profiles, and it canalso host end user applications, which means no external microcontroller is required insize, price or power constrained devices. The BGM111 Bluetooth Module also has highlyflexible hardware interfaces to connect to different peripherals or sensors.

BGM111主要特性:

• Bluetooth 4.2 Compliant

• Integrated antenna

• TX power: up to +8 dBm

• RX sensitivity: down to -92 dBm

• Range: up to 200 meters

• 32-bit ARM® Cortex®-M4 core at 40 MHz

• Flash memory: 256 kB

• RAM: 32 kB

• Autonomous Hardware Crypto Acceleratorand Random Number Generator

• Integrated DC-DC Converter

• Onboard Bluetooth stack

BGM111產品亮點:

• Low Power Wireless System-on-Chip.

• High Performance 32-bit 40 MHz ARM Cortex®-M4 withDSP instruction and floating-point unit for efficient signalprocessing

• 256 kB flash program memory

• 32 kB RAM data memory

• 2.4 GHz radio operation

• TX power up to +8 dBm

• Low Energy Consumption

• 8.7 mA RX current at 2.4 GHz

• 8.2 mA TX current @ 0 dBm output power at 2.4 GHz

• 63 μA/MHz in Active Mode (EM0)

• 2.5 μA EM2 DeepSleep current (full RAM retention andRTCC running from LFXO)

• 2.1 μA EM3 Stop current (State/RAM retention)

• Wake on Radio with signal strength detection, preamblepattern detection, frame detection and timeout

• High Receiver Performance

• -92 dBm sensitivity @ 1 Mbit/s GFSK (2.4 GHz)

• Supported Protocols

• Bluetooth®

• Support for Internet Security

• General Purpose CRC

• Random Number Generator

• Hardware Cryptographic Acceleration for AES 128/256,SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC

• Wide Selection of MCU peripherals

• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)

• 2× Analog Comparator (ACMP)

• Digital to Analog Current Converter (IDAC)

• 25 pins connected to analog channels (APORT) shared betweenAnalog Comparators, ADC, and IDAC

• 25 General Purpose I/O pins with output state retention andasynchronous interrupts

• 8 Channel DMA Controller

• 12 Channel Peripheral Reflex System (PRS)

• 2×16-bit Timer/Counter

• 3 + 4 Compare/Capture/PWM channels

• 32-bit Real Time Counter and Calendar

• 16-bit Low Energy Timer for waveform generation

• 32-bit Ultra Low Energy Timer/Counter for periodic wake-upfrom any Energy Mode

• 16-bit Pulse Counter with asynchronous operation

• Watchdog Timer with dedicated RC oscillator @ 50nA

• 2×Universal Synchronous/Asynchronous Receiver/Transmitter(UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)

• Low Energy UART (LEUART™)

• I2C interface with SMBus support and address recognitionin EM3 Stop

• Wide Operating Range

• 1.85 V to 3.8 V single power supply

• 2.4 V to 3.8 V when using DC-DC

• Integrated DC-DC

• -40 ℃ to +85 ℃

• Dimensions

• 12.9 x 15.00 x 2.2 mm

BGM111主要應用:

• IoT Sensors and End Devices

• Commercial and Retail

• Health and Wellness

• Industrial, Home and Building Automation

• Smart Phone, Tablet and PC Accessories

圖1. BGM111框圖

圖2. EFR32BG1詳細框圖

圖3. BGM111和主CPU連接圖

圖4. BGM111 SPI外設連接圖

圖5. BGM111和I2C設備連接圖

Blue Gecko Bluetooth®模塊無線入門板SLWSTK6101B

The Blue Gecko Bluetooth® Module Wireless Starter Kit is an excellent starting point toget familiar with the BGM111 Bluetooth Module.

The Wireless Starter Kit Mainboard contains sensors and peripherals demonstrating some of the BGM111’s many capabilities. The kit provides all necessary tools for developinga Silicon Labs wireless application.

RADIO BOARD FEATURES

• BGM111 Blue Gecko Bluetooth Modulewith 256 kB Flash and 32 kB RAM. (P/NBGM111)

• Integrated high performance chip antenna

• Transmit power up to 8 dBm

• CPU core 32-bit ARM Cortex-M4

SOFTWARE SUPPORT

• Blue Gecko Bluetooth Software

• Blue Gecko Bluetooth SDK

• Example applications for the kit

• iOS and Android applications

SLWSTK6101B主要特性:

• Supplied with BGM111 Blue GeckoBluetooth Module Radio Board BRD4300A

• Supplied with BGM113 Blue GeckoBluetooth Module Radio Board BRD4301A

• Ethernet and USB connectivity

• SEGGER J-Link on-board debugger

• Debug Multiplexer supporting externalhardware as well as radio board

• Silicon Labs’Si7021 Relative Humidity andTemperature sensor

• Ultra low power 128x128 pixel MemoryLCD

• LEDs / Push buttons / Reset button

• 20-pin 2.54 mm header for expansionboards

• Breakout pads for direct access to all radioI/O pins

• Power sources include USB and CR2032coin cell holder.

擴展板主要特性:

• Accelerometer

• Buttons and LEDs

• Joystick

• Footprint for I2C Expansion device

圖6. SLWSTK6101B外形圖

SLWSTK6101B包括:

• 1x BRD4001A Wireless Starter Kit Mainboard

• 1x BRD4301A Blue Gecko BGM113 Bluetooth® Module Radio Board

• 1x BRD4300A Blue Gecko BGM111 Bluetooth® Module Radio Board

• 1x BRD8006A Blue Gecko Module Kit Add-on Board

• 1x CR2032 Lithium battery

• 1x USB Type A USB Mini-B cables

圖7. SLWSTK6101B硬件分布圖

圖8. SLWSTK6101B硬件框圖

圖9. SLWSTK6101B主板BRD4001_A01電路圖(1)

圖10. SLWSTK6101B主板BRD4001_A01電路圖(2)

圖11. SLWSTK6101B主板BRD4001_A01電路圖(3)

圖12. SLWSTK6101B主板BRD4001_A01電路圖(4)

圖13. SLWSTK6101B主板BRD4001_A01電路圖(5)

圖14. SLWSTK6101B主板BRD4001_A01電路圖(6)

圖15. SLWSTK6101B主板BRD4001_A01電路圖(7)

本站聲明: 本文章由作者或相關機構授權發布,目的在于傳遞更多信息,并不代表本站贊同其觀點,本站亦不保證或承諾內容真實性等。需要轉載請聯系該專欄作者,如若文章內容侵犯您的權益,請及時聯系本站刪除。
換一批
延伸閱讀

LED驅動電源的輸入包括高壓工頻交流(即市電)、低壓直流、高壓直流、低壓高頻交流(如電子變壓器的輸出)等。

關鍵字: 驅動電源

在工業自動化蓬勃發展的當下,工業電機作為核心動力設備,其驅動電源的性能直接關系到整個系統的穩定性和可靠性。其中,反電動勢抑制與過流保護是驅動電源設計中至關重要的兩個環節,集成化方案的設計成為提升電機驅動性能的關鍵。

關鍵字: 工業電機 驅動電源

LED 驅動電源作為 LED 照明系統的 “心臟”,其穩定性直接決定了整個照明設備的使用壽命。然而,在實際應用中,LED 驅動電源易損壞的問題卻十分常見,不僅增加了維護成本,還影響了用戶體驗。要解決這一問題,需從設計、生...

關鍵字: 驅動電源 照明系統 散熱

根據LED驅動電源的公式,電感內電流波動大小和電感值成反比,輸出紋波和輸出電容值成反比。所以加大電感值和輸出電容值可以減小紋波。

關鍵字: LED 設計 驅動電源

電動汽車(EV)作為新能源汽車的重要代表,正逐漸成為全球汽車產業的重要發展方向。電動汽車的核心技術之一是電機驅動控制系統,而絕緣柵雙極型晶體管(IGBT)作為電機驅動系統中的關鍵元件,其性能直接影響到電動汽車的動力性能和...

關鍵字: 電動汽車 新能源 驅動電源

在現代城市建設中,街道及停車場照明作為基礎設施的重要組成部分,其質量和效率直接關系到城市的公共安全、居民生活質量和能源利用效率。隨著科技的進步,高亮度白光發光二極管(LED)因其獨特的優勢逐漸取代傳統光源,成為大功率區域...

關鍵字: 發光二極管 驅動電源 LED

LED通用照明設計工程師會遇到許多挑戰,如功率密度、功率因數校正(PFC)、空間受限和可靠性等。

關鍵字: LED 驅動電源 功率因數校正

在LED照明技術日益普及的今天,LED驅動電源的電磁干擾(EMI)問題成為了一個不可忽視的挑戰。電磁干擾不僅會影響LED燈具的正常工作,還可能對周圍電子設備造成不利影響,甚至引發系統故障。因此,采取有效的硬件措施來解決L...

關鍵字: LED照明技術 電磁干擾 驅動電源

開關電源具有效率高的特性,而且開關電源的變壓器體積比串聯穩壓型電源的要小得多,電源電路比較整潔,整機重量也有所下降,所以,現在的LED驅動電源

關鍵字: LED 驅動電源 開關電源

LED驅動電源是把電源供應轉換為特定的電壓電流以驅動LED發光的電壓轉換器,通常情況下:LED驅動電源的輸入包括高壓工頻交流(即市電)、低壓直流、高壓直流、低壓高頻交流(如電子變壓器的輸出)等。

關鍵字: LED 隧道燈 驅動電源
關閉