日本黄色一级经典视频|伊人久久精品视频|亚洲黄色色周成人视频九九九|av免费网址黄色小短片|黄色Av无码亚洲成年人|亚洲1区2区3区无码|真人黄片免费观看|无码一级小说欧美日免费三级|日韩中文字幕91在线看|精品久久久无码中文字幕边打电话

當前位置:首頁 > 汽車電子 > 汽車電子技術文庫
[導讀] TI公司的AWR1642是工作在76-81GHz頻段的單片F(xiàn)MCW雷達傳感器,采用低功耗的45nm的RFCMOS工藝,具有調頻連續波(FMCW)收發器,集成了整數PLL,發送器,接收器,基帶和A

TI公司的AWR1642是工作在76-81GHz頻段的單片F(xiàn)MCW雷達傳感器,采用低功耗的45nm的RFCMOS工藝,具有調頻連續波(FMCW)收發器,集成了整數PLL,發送器,接收器,基帶和A2D,有四個接收通路,2個發送通路,發送功率12.5dBm,76 - 77 GHz時的接收噪音14dB,77-81 GHz時的接收噪音15dB,采用基于ARM? Cortex?-R4F的無線電控制系統,具有內置的校驗和自測,主要用在盲點檢測,變道輔助,停車輔助,路口交通警報,占用檢測,簡單手勢識別和車門開啟應用.本文介紹了AWR1642主要特性,框圖和應用電路與參考電路圖,評估模塊AWR1642BOOST主要特性以及采用評估模塊的短距離雷達(SRR)參考設計TIDEP-0092主要特性和指標,框圖,電路圖和材料清單.

The AWR1642 device is an integrated single-chip FMCW radar sensor capable of operaTIon in the 76- to81-GHz band. The device is built with TI’s low-power 45-nm RFCMOS process and enablesunprecedented levels of integraTIon in an extremely small form factor. The AWR1642 is an ideal solutionfor low-power, self-monitored, ultra-accurate radar systems in the automotive space.

The AWR1642 device is a self-contained FMCW radar sensor single-chip solution that simplifies theimplementation of Automotive Radar sensors in the band of 76 to 81 GHz. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 2TX, 4RX system with built-in PLLand A2D converters. It integrates the DSP subsystem, which contains TI’s high-performance C674x DSPfor the Radar Signal processing. The device includes an ARM R4F-based processor subsystem, which isresponsible for radio configuration, control, and calibration. Simple programming model changes canenable a wide variety of sensor implementation (Short, Mid, Long) with the possibility of dynamicreconfiguration for implementing a multimode sensor. Additionally, the device is provided as a completeplatform solution including reference hardware design, software drivers, sample configurations, API guide,and user documentation.

AWR1642主要特性:

? FMCW Transceiver
– Integrated PLL, Transmitter, Receiver,Baseband, and A2D
– 76- to 81-GHz Coverage With 4 GHz AvailableBandwidth
– Four Receive Channels
– Two Transmit Channels
– Ultra-Accurate Chirp (Timing) Engine Based onFractional-N PLL
– TX Power: 12.5 dBm
– RX Noise Figure:
– 14 dB (76 to 77 GHz)
– 15 dB (77 to 81 GHz)
– Phase Noise at 1 MHz:
– –95 dBc/Hz (76 to 77 GHz)
– –93 dBc/Hz (77 to 81 GHz)
? Built-in Calibration and Self-Test (Monitoring)
– ARM? Cortex?-R4F-Based Radio ControlSystem
– Built-in Firmware (ROM)
– Self-calibrating System Across Frequency andTemperature
? C674x DSP for FMCW Signal Processing
? On-Chip Memory: 1.5MB
? Cortex-R4F Microcontroller for Object Tracking and
Classification, AUTOSAR, and Interface Control
– Supports Autonomous Mode (Loading UserApplication from QSPI Flash Memory)
? Integrated Peripherals
– Internal Memories With ECC
? Host Interface
– CAN (Two Instances, One Being CAN-FD)
? Other Interfaces Available to User Application
– Up to 6 ADC Channels
– Up to 2 SPI Channels
– Up to 2 UARTs
I2C
– GPIOs
– 2-Lane LVDS Interface for Raw ADC Data andDebug Instrumentation
? ASIL B Targeted
? AECQ100 Qualified
? AWR1642 Advanced Features
– Embedded Self-monitoring With No HostProcessor Involvement
– Complex Baseband Architecture
– Embedded Interference Detection Capability
? Power Management
– Built-in LDO Network for Enhanced PSRR
– I/Os Support Dual Voltage 3.3 V/1.8 V
? Clock Source
– Supports External Oscillator at 40 MHz
– Supports Externally Driven Clock (Square/Sine)at 40 MHz
– Supports 40 MHz Crystal Connection with LoadCapacitors
? Easy Hardware Design
– 0.65-mm Pitch, 161-Pin 10.4 mm × 10.4 mmFlip Chip BGA Package for Easy Assembly andLow-Cost PCB Design
– Small Solution Size
? Supports Automotive Temperature OperatingRange

AWR1642應用:

? Blind Spot Detection
? Lane Change Assistance
? Cross Traffic Alert
? Parking Assistance
? Occupancy Detection
? Simple Gesture Recognition
? Car Door Opener Applications


圖1.AWR1642功能框圖


圖2.AWR1642自主雷達傳感器汽車應用框圖


圖3.處理器子系統框圖


圖4.短距離雷達框圖


圖5.AWR1642參考電路圖


圖6.AWR1642低噪音LDO電路圖


圖7.AWR1642參考電路PCB設計圖(頂層走線)


圖8.AWR1642參考電路PCB設計圖(頂層走線Closeup)


圖9.AWR1642參考電路PCB設計圖(底層走線)

AWR1642評估模塊(AWR1642BOOST)單片mmWave檢測解決方案

The AWR1642 BoosterPack from Texas Instruments is an easy-to-use evaluation board for the AWR1642mmWave sensing device, with direct connectivity to the microcontroller (MCU) LaunchPad DevelopmentKit. The BoosterPack contains everything required to start developing software for on-chip C67x DSP coreand low-power ARM R4F controllers, including onboard emulation for programming and debugging as wellas onboard buttons and LEDs for quick integration of a simple user interface.
The standard 20-pin BoosterPack headers make the device compatible with a wide variety of TI MCULaunchPads and enables easy prototyping.

評估模塊AWR1642BOOST主要特性:

? Two 20-pin LaundPad connectors that leverages the ecosystem of the TI LaunchPad
? XDS110 based JTAG emulation with a serial port for onboard QSPI flash programming
? Back-channel UART through USB-to-PC for logging purposes
? Onboard antenna
? 60-pin, high-density (HD) connector for raw analog-to-digital converter (ADC) data over LVDS andtrace-data capability
? Onboard CAN-FD transceiver
? One button and two LEDs for basic user interface
? 5-V power jack to power the board

評估模塊AWR1642BOOST包括:

? AWR1642BOOST evaluation board
? Mounting brackets, screws, and nuts to place the printed-circuit board (PCB) vertical
? Micro USB cable to connect to PC


圖10.評估模塊AWR1642BOOST外形圖(正面)


圖11.評估模塊AWR1642BOOST外形圖(背面)


圖12.評估模塊AWR1642BOOST框圖

采用評估模塊AWR1642BOOST的短距離雷達(SRR)參考設計TIDEP-0092

The TIDEP-0092 provides a foundation for a shortrange radar (SRR) application using the AWR1642evaluation module (EVM). This design allows the userto estimate and track the position (in the azimuthalplane) and the velocity of objects in its field of view up to 80 m.

Autonomous control of a vehicle provides quality-of-life and safety benefits in addition to making therelatively mundane act of driving safer and less difficult. The quality-of-life features include the ability of avehicle to park itself or to determine whether a lane change is possible and provide features like automaticcruise control—where a vehicle maintains a constant distance with respect to the car ahead of it,essentially tracking the velocity of the car in front of it. Autonomous breaking and collision avoidance aresafety features that prevent accidents caused by driver inattention. These features work by observing thearea in front of a car and alerting the autonomous driving subsystems if obstacles are observed that arelikely to hit the car. Implementing these technologies require a variety of sensors to detect obstacles in theenvironment and track their velocities and positions over time.

參考設計TIDEP-0092主要特性:

? Single-Chip FMCW Radio Detection and Ranging(RADAR) for SRR Applications
? Detect Objects (Such as Cars and Trucks) up to80-m Away With Range Resolution of 35 cm;Objects 20-m Away Detectable With Resolution of4.3 cm
? Clustering and Tracking on Detected Outputs
? Antenna Field of View ±60o With AngularResolution of Approximately 15o
? Source Code for Fast Fourier Transform (FFT)Processing and Detection Provided by mmWaveSoftware Development Kit (SDK)
? AWR1642 Demonstrates Design
? Radar Front End and Detection Configuration FullyExplained

參考設計TIDEP-0092應用:

? Lane Change Assist (LCA)
? Autonomous Parking
? Cross Traffic Alert (CTA)
? Blind Spot Detection (BSD)


圖13.參考設計TIDEP-0092外形圖
參考設計TIDEP-0092主要系統指標:



圖14.SRR系統框圖


圖15.參考設計TIDEP-0092電路圖(1)


圖16.參考設計TIDEP-0092電路圖(2)


圖17.參考設計TIDEP-0092電路圖(3)


圖18.參考設計TIDEP-0092電路圖(4)


圖19.參考設計TIDEP-0092電路圖(5)


圖20.參考設計TIDEP-0092電路圖(6)


圖21.參考設計TIDEP-0092電路圖(7)


圖22.參考設計TIDEP-0092電路圖(8)


圖23.參考設計TIDEP-0092電路圖(9)


圖24.參考設計TIDEP-0092電路圖(10)


圖25.參考設計TIDEP-0092電路圖(11)


圖26.參考設計TIDEP-0092電路圖(12)


圖27.參考設計TIDEP-0092電路圖(13)


圖28.參考設計TIDEP-0092電路圖(14)


圖29.參考設計TIDEP-0092電路圖(15)


圖30.參考設計TIDEP-0092電路圖(16)
參考設計TIDEP-0092材料清單:


詳情請見:


以及


swrs203a.pdf
swru508b.pdf
tidud36b.pdf
tidrqr9.pdf

本站聲明: 本文章由作者或相關機構授權發布,目的在于傳遞更多信息,并不代表本站贊同其觀點,本站亦不保證或承諾內容真實性等。需要轉載請聯系該專欄作者,如若文章內容侵犯您的權益,請及時聯系本站刪除。
換一批
延伸閱讀

LED驅動電源的輸入包括高壓工頻交流(即市電)、低壓直流、高壓直流、低壓高頻交流(如電子變壓器的輸出)等。

關鍵字: 驅動電源

在工業自動化蓬勃發展的當下,工業電機作為核心動力設備,其驅動電源的性能直接關系到整個系統的穩定性和可靠性。其中,反電動勢抑制與過流保護是驅動電源設計中至關重要的兩個環節,集成化方案的設計成為提升電機驅動性能的關鍵。

關鍵字: 工業電機 驅動電源

LED 驅動電源作為 LED 照明系統的 “心臟”,其穩定性直接決定了整個照明設備的使用壽命。然而,在實際應用中,LED 驅動電源易損壞的問題卻十分常見,不僅增加了維護成本,還影響了用戶體驗。要解決這一問題,需從設計、生...

關鍵字: 驅動電源 照明系統 散熱

根據LED驅動電源的公式,電感內電流波動大小和電感值成反比,輸出紋波和輸出電容值成反比。所以加大電感值和輸出電容值可以減小紋波。

關鍵字: LED 設計 驅動電源

電動汽車(EV)作為新能源汽車的重要代表,正逐漸成為全球汽車產業的重要發展方向。電動汽車的核心技術之一是電機驅動控制系統,而絕緣柵雙極型晶體管(IGBT)作為電機驅動系統中的關鍵元件,其性能直接影響到電動汽車的動力性能和...

關鍵字: 電動汽車 新能源 驅動電源

在現代城市建設中,街道及停車場照明作為基礎設施的重要組成部分,其質量和效率直接關系到城市的公共安全、居民生活質量和能源利用效率。隨著科技的進步,高亮度白光發光二極管(LED)因其獨特的優勢逐漸取代傳統光源,成為大功率區域...

關鍵字: 發光二極管 驅動電源 LED

LED通用照明設計工程師會遇到許多挑戰,如功率密度、功率因數校正(PFC)、空間受限和可靠性等。

關鍵字: LED 驅動電源 功率因數校正

在LED照明技術日益普及的今天,LED驅動電源的電磁干擾(EMI)問題成為了一個不可忽視的挑戰。電磁干擾不僅會影響LED燈具的正常工作,還可能對周圍電子設備造成不利影響,甚至引發系統故障。因此,采取有效的硬件措施來解決L...

關鍵字: LED照明技術 電磁干擾 驅動電源

開關電源具有效率高的特性,而且開關電源的變壓器體積比串聯穩壓型電源的要小得多,電源電路比較整潔,整機重量也有所下降,所以,現在的LED驅動電源

關鍵字: LED 驅動電源 開關電源

LED驅動電源是把電源供應轉換為特定的電壓電流以驅動LED發光的電壓轉換器,通常情況下:LED驅動電源的輸入包括高壓工頻交流(即市電)、低壓直流、高壓直流、低壓高頻交流(如電子變壓器的輸出)等。

關鍵字: LED 隧道燈 驅動電源
關閉